Vehicle Lifts
10,000 lb. Inground Lift with Bench Mounted Controls
$11,950.00
67-EV1020BMC
10,000 lb. capacity electric/hydraulic inground lift with bench mounted controls, 8.5 in. chrome pistons, wide drive-through, 3-stage arms and double telescoping screw pads.
Features
- 10,000 lb. lift capacity.
- 3-stage front and 3-stage rear arms provide access to the lift points of a wide range of cars and trucks, maximizing revenue potential.
- Bench Mounted Controls provide obstruction-free operation.
- 8.5 in. diameter chrome pistons provide greater stability under load.
- Chrome non-breathing ram style cylinder provides for longer lift life.
- Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings.
- Long bearing contact provides increased stability.
- Mechanical lock engages every 3 in. allowing ergonomic working height for technicians to increase productivity and minimize fatigue.
- Stainless steel air lock release cylinder promotes longer working life with its corrosion resistant design.
- Fully-contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground.
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters.
- 87_ drive-thru accommodates wider vehicles, minimizes tire damage and provides for easy drive-on.
Technical
| Load carrying capacity | 10,000 | lbs |
| Piston spacing | 87 Drive-thru | inch |
| Oil fill capacity | 3 | gallons |
| Effective height | 73-3/4 | inch |
| Motor output | 2HSP | kW |
| Lifting-piston diameter | 8-1/2 | inch |
| Lifting/lowering time approx. | nore less than 17 at capacity | s |
| Weight approx. | 2,520 | lbs |
| Color | Choice of colors | |
| Power supply | 208/230 Single Phase | V/Hz/A |
| Extension height | 73-3/4 | inch |
| Operating pressure | 75-125PSI | bar |
| Dimensions (L x W x H) rubber pad | 6-1/2 - 8-3/4 | inch |
| Dimensions (L x W x H) | 9.75 x 6 x 2.5 / 4.75 x 3 x 1 | inch |
