Car Wash and Detail Systems
Stationary L.P. Gas Fired Electric Powered 4 gpm, 3000 psi Hot Water Pressure Washer
$9,999.00
21-3000STLEF
Cam Spray
Click to view California Proposition 65 warning
The ST Hot Water Pressure Washers heated by L.P. Gas are designed to be used in a stationary location and will be need to be connected to a 1” gas line.
Designed for efficient operation using the latest in forced air burner technology. All systems that use or burn a fuel should be operated outdoors or properly vented.
Features include:
- Industrial motor that is totally enclosed and thermal overload protected, industrial triplex plunger pump with ceramic plungers and stainless steel valves is protected by unloader valve and secondary pressure pop off.
- Equipped with low pressure chemical injection for application of concentrate liquid detergents and solutions. The low pressure injector operates best with the 50’ hose included, for longer length hoses and pipeline systems the injector will have to be relocated within 50’ of the trigger gun.
- Burner system includes a schedule 80 coil with stainless steel wrap, and is controlled by an adjustable thermostat and temperature limit switch for a maximum temperature 195° F.
- The skid frame is industrial coated steel tubing.
- Heavy duty trigger gun with a dual wand with side handle valve allows for user to switch from high pressure cleaning to detergent application and is equipped with quick change 0°,15°,25° and 40° nozzles.
- These models require venting and proper make up air for safety and proper combustion, call your local HVAC professional.
- Hot Water provided by an LP burner system.
- Powered by a 7.5 h.p. Electric Motor 230 volt, 34 amp single phase.
- 4 gpm @ 3000 psi.
- Dimensions 47" Length, 29" width, 46" Height.
- Max Temp 195 degrees F.
- 570 lbs.
- 8" burner stack must be installed and vented by a qualified HVAC professional.
Features
